Solid State Relay - DC Control Input/AC Output from Crydom

These industry standard panel mount SSRs utilise a control input between 3 to 32V DC to switch a circuit rated between 24 and 280V AC. They are ideal for use with all of the temperature controllers shown on this website which feature a SSR output. The units are encapsulated in thermally conductive epoxy. We recommend the use of our integral DIN Rail Mounting and Heatsink Kit, which can be mounted on the back of the relay. It gives maximum heat dissipation and allows easy mounting onto a DIN Rail if required. Thermal transfer pads are also available for placing between the relay and the heatsink. The pads can also be used between a relay and the mounting surface when a heat sink is not used. A plastic safety cover is also recommended.
  • Input control voltage range: 3 to 32V DC
  • Typical input Current: 3.4mA @ 5V DC
  • Zero voltage switching (phase control available on request)
  • Load Voltage range: 24-280V AC rms
  • Load Current range (with heat sink at 25°C): 10 to 90 amps dependent upon model selected
  • Dielectric strength (Input/output/base): 4000V AC rms
  • Ambient operating temperature range: -40°C to +80°C
  • Dimensions: SSR, 58.4mm x 45mm x 22.9mm (HxWxD),
  • Heatsink, 80mm max x 45 x 95mm max (HxWxD)
The following types are available:
SSR - DC Input / AC Output
Order Code Description 1 - 9 10 - 24 25 - 49 Buy
430-110 10A rated £54.60 £52.00 £49.30 Add
430-115 25A rated £62.80 £59.70 £56.70 Add
430-120 50A rated £64.60 £61.40 £58.30 Add
430-125 75A rated £104.00 £97.90 £93.00 Add
430-130 90A rated £114.00 £108.00 £103.00 Add
430-132 Thermal Transfer Pad £1.10 £1.05 £0.95 Add
430-135 Integral DIN Rail Mounting & Heatsink Kit £31.30 £29.70 £28.30 Add
430-138 Plastic Safety Cover £4.30 £4.10 £3.90 Add