Flange Plate

Suitable for vertically fixing sensors between 1.5mm and 8mm diameter into non pressure applications. By fixing the adjustable compression fitting at the right point along the sensor sheath, the flange plate can then either be fixed via the mounting holes in a variety of applications or alternatively used as a stop through a hole in the process wall for vertical applications.
  • Manufactured in either brass or stainless steel
  • Dimensions: Flange - 50mm OD x 10mm thick overall. Main plate is 5mm thick. 3 x 4mm holes are drilled on a 40mm PCD at 120° angles.
  • Tapped 1/8in BSPP to accept the relevant 1/8in BSP fittings which are also offered
  • Suitable for use with either 1.5, 3.0, 4.5 or 6.0mm OD sensors
The following types are available:
Flange Plate
Order Code Description 1 - 9 10 - 24 25 - 49 Buy
875-900 Brass Flange Plate £11.90 £10.90 £9.60 Add
875-950 Stainless Steel Flange Plate £16.50 £15.10 £13.30 Add
875-200 1.5mm x 1/8" BSPT Brass Fitting £2.50 £2.30 £2.10 Add
875-212 3.0mm x 1/8" BSPT Brass Fitting £2.50 £2.30 £2.10 Add
875-224 4.5mm x 1/8" BSPT Brass Fitting £2.50 £2.30 £2.10 Add
875-236 6.0mm x 1/8" BSPT Brass Fitting £2.50 £2.30 £2.10 Add
875-450 1.5mm x 1/8" BSPT St/Steel Fitting £3.10 £2.70 £2.40 Add
875-462 3.0mm x 1/8" BSPT St/Steel Fitting £3.10 £2.70 £2.40 Add
875-474 4.5mm x 1/8" BSPT St/Steel Fitting £3.10 £2.70 £2.40 Add
875-486 6.0mm x 1/8" BSPT St/Steel Fitting £3.10 £2.70 £2.40 Add